set up my network connections and I am on a wireless hp pavilion
My network places doesn't show on start menu and i cant connect to the network. Is there a Problem with my mother board?
Network connections doesn't show after setting it up?
Go to Start %26gt; Control Panel %26gt; Network Connections. If there is a Wireless Connection Icon, Click on it.
Make sure that you are connected and that the network key is in if there is one. If your computer is saying there are no wireless networks available, but your router is working, then set your wireless settings to look for you network name. (i.e. if the name is WIRELESS, type in Wireless. Make sure you have it set to automatically connect
Wednesday, July 14, 2010
Facebook????? network issue.......?
i just recently joined facebook and i was wondering......after you've joined a high school network.......how long does it take to be confirmed into that network.....i have about 3 friends who are part of it already and they have confirmed we are friends........but it still says you are awaiting confirmation etc etc......from this network............what do you do to get confirmed......also why do my friends also have the graduation year listed as part of their network......plzzz help i'm new to this.........and it says it will close my account if i'm not confirmed soon........aaaaaaaaagh...........
Facebook????? network issue.......?
When you add someone else from your school after you request to join your high school's network, they will get a prompt to approve and confirm you.
You can also put your class by editing your profile. It's under Education.
Facebook????? network issue.......?
When you add someone else from your school after you request to join your high school's network, they will get a prompt to approve and confirm you.
You can also put your class by editing your profile. It's under Education.
School network for opening day?
I need to make a school network.I have 14 PC using wireless NIC. 2 star topology(each has 3 PCs).What security I need?Should I give them IP addresses?and how to give them IP?What is the use of local IP address?What is 10BAseT?WHich cable I need to use in it?How to do security testing?What is Network protocol analyzer?What is Special network requirements,e.g. SMS, Telnet, remote IP camera(What are their use?How to do Network setup and connection?Please help me to compare the use of UTP cable and Wireless LAN.What is system acceptance checklists?How to do wireless signal strength testing? I am so sorry that I have so many questions need to ask.Please help me.It is very urgent.
I need a very long paragraph.Please send me a e-mail to answewr my question.Thank you so much.
Here is my e-mail : april_tai91@yahoo.com.hk
Thank you !!!
School network for opening day?
Well, I'll try to help you on this one here, so anyone can read this , if they too need help. Well, If you need a heavy-duty router, used for WIRELESS COMPUTERS, then I recommend a D-link router. You may also use a Linksys, its your choice. (linksys has a configuration page so you can mange the IP addresses of the different computers.) Now once you have a WIRELESS ROUTER, you can use that for the wireless PC's and for the wired PC's. You can also use a network switch if you want to buy only one router. Dont be too savvy on routers, buy at least 2.
The Security you need, is just a basic Anti-Virus. If you want to see what people are doing on the computer, then I recommend that you use an internet Cafe Program. I recommend MyCupCafe premium. It works well.
If you want to connect the pc to the router, you will need an ethernet cable. Just insert the ethernet cable into one of the router slots.
To connect to the internet, just insert the ethernet cable into the Cable/Dsl modem, then insert the other end of the ethernet cable into your router under the "INTERNET port"
If you have another router, just insert one of the ethernet cables into your router, then insert the other end in the INTERNET Port.
Telnet is a network protocol that you can use in your LAN (Local Area Network or your school's network). You can use that to change passwords of different computers, or to FTP them (File Transfer Protocol). FTP is a way to transfer files from one PC to another. Wireless signal ,.. hmm.. you dont have to test for it. Just open it up, by going to START%26gt; MY NETWORK PLACES%26gt;THEN CLICK VIEW NETWORK CONNECTIONS (on the left side). Then double-click on the wireless network, and there should be a new window that would pop-up. There, it will display the strength of the network.
You can administer an IP address manually, or it can be done automatically.
For example, if it is automatic, and you use a linksys router, the first PC connected would be 192.168.0.0 (something like that, should be close to it at least.) then it would be 192.168.1.101 for the 2nd PC 192.168.1.102 for the 3rd, and so on.
Well, hopefully I had helped you in some kind. =).
Good luck, really. =).
Happy New Year's Day!.
just e-mail me on halo56111@yahoo.com or add me on ym:
halo56111
if you still need help.
Good luck again! =).
root canal
I need a very long paragraph.Please send me a e-mail to answewr my question.Thank you so much.
Here is my e-mail : april_tai91@yahoo.com.hk
Thank you !!!
School network for opening day?
Well, I'll try to help you on this one here, so anyone can read this , if they too need help. Well, If you need a heavy-duty router, used for WIRELESS COMPUTERS, then I recommend a D-link router. You may also use a Linksys, its your choice. (linksys has a configuration page so you can mange the IP addresses of the different computers.) Now once you have a WIRELESS ROUTER, you can use that for the wireless PC's and for the wired PC's. You can also use a network switch if you want to buy only one router. Dont be too savvy on routers, buy at least 2.
The Security you need, is just a basic Anti-Virus. If you want to see what people are doing on the computer, then I recommend that you use an internet Cafe Program. I recommend MyCupCafe premium. It works well.
If you want to connect the pc to the router, you will need an ethernet cable. Just insert the ethernet cable into one of the router slots.
To connect to the internet, just insert the ethernet cable into the Cable/Dsl modem, then insert the other end of the ethernet cable into your router under the "INTERNET port"
If you have another router, just insert one of the ethernet cables into your router, then insert the other end in the INTERNET Port.
Telnet is a network protocol that you can use in your LAN (Local Area Network or your school's network). You can use that to change passwords of different computers, or to FTP them (File Transfer Protocol). FTP is a way to transfer files from one PC to another. Wireless signal ,.. hmm.. you dont have to test for it. Just open it up, by going to START%26gt; MY NETWORK PLACES%26gt;THEN CLICK VIEW NETWORK CONNECTIONS (on the left side). Then double-click on the wireless network, and there should be a new window that would pop-up. There, it will display the strength of the network.
You can administer an IP address manually, or it can be done automatically.
For example, if it is automatic, and you use a linksys router, the first PC connected would be 192.168.0.0 (something like that, should be close to it at least.) then it would be 192.168.1.101 for the 2nd PC 192.168.1.102 for the 3rd, and so on.
Well, hopefully I had helped you in some kind. =).
Good luck, really. =).
Happy New Year's Day!.
just e-mail me on halo56111@yahoo.com or add me on ym:
halo56111
if you still need help.
Good luck again! =).
root canal
Network diagnostic issues?
When I ran my network diagnostic, it show that the ip address failed, has anybody know of a resolution to this problem. I have internet working, but when am trying to use windows media to shop for music it gives me page saying that it cannot to the interney and that I need to check for network settings, but my internet works fine. So I tried the network diagnosic and it gives me a failed ip address, can anybody help?
Network diagnostic issues?
You may need to release and renew your IP address. Here's a link to instructions for Windows XP:
http://compnetworking.about.com/cs/windo...
And here's a link to instructions for 98/ME:
http://compnetworking.about.com/cs/win9x...
Before you try this, though, I strongly suggest you power down your PC, your cable/DSL modem and your wireless router. Leave them off for a minimum of 20 seconds and then power up the modem; followed by the router. Once the connection to the Internet has stabilized; power up your PC. This generally works for me and I hope it works for you, as well.
Reply:With all the gift cards given at Christmas, music sales sites have been getting hammered and can't keep up with all of the traffic. Just wait it out or try very late at night, especially if most sites on the internet are working fine for you.
Network diagnostic issues?
You may need to release and renew your IP address. Here's a link to instructions for Windows XP:
http://compnetworking.about.com/cs/windo...
And here's a link to instructions for 98/ME:
http://compnetworking.about.com/cs/win9x...
Before you try this, though, I strongly suggest you power down your PC, your cable/DSL modem and your wireless router. Leave them off for a minimum of 20 seconds and then power up the modem; followed by the router. Once the connection to the Internet has stabilized; power up your PC. This generally works for me and I hope it works for you, as well.
Reply:With all the gift cards given at Christmas, music sales sites have been getting hammered and can't keep up with all of the traffic. Just wait it out or try very late at night, especially if most sites on the internet are working fine for you.
My Network Places - Win2k Pro Question #5?
Setup: Please tell me what I left out and what more I might do to enhance the experience.
During this experience I somehow became logged into Windows as Administrator and lost part of my desktop including my Internet Service Provider.
Know who you are logged in as right now.
If you become logged in as someone else then:
Start | Log Off... | Are you sure? -%26gt; yes
Log in window appears
Type in the name you want to be logged in as.
1. Install a router
2. Unique Computer Name %26amp; common Workgroup:
Control Panel | System | Network Identification Tab
-
press [Properties]
Enter Computer name
(.) Workgroup:
[ OurWorkGroup ] (or whatever)
-
Press [ Network ID ] ( Network Identification Wizard)
[ Next %26gt;]
(.) This computer is for home use and is not part of a business network
[ Next %26gt;]
(.) Windows always assumes the following user has logged on to this ...
User Name: [Administrator]
My Network Places - Win2k Pro Question #5?
First off you lost what you say "part of your desktop" because of exactly what you stated. You became logged on as the Administrator for the machine. However, This would indeed result in the reason nothing was set up for your internet provider, this sort of setting does not carry over in most cases.
Secondly the setup looks fine, but im not sure exactly what you are wanting out of this as you say experience. Be a little more specific on what you are wanting out of it.
Reply:man, why dont you just call router support like and they will walk you thru the setup for free?
Reply:If this is how to setup a home network then Id say you have it but must warn you that you'll need to be alot more specific when dealing with novice users...
During this experience I somehow became logged into Windows as Administrator and lost part of my desktop including my Internet Service Provider.
Know who you are logged in as right now.
If you become logged in as someone else then:
Start | Log Off... | Are you sure? -%26gt; yes
Log in window appears
Type in the name you want to be logged in as.
1. Install a router
2. Unique Computer Name %26amp; common Workgroup:
Control Panel | System | Network Identification Tab
-
press [Properties]
Enter Computer name
(.) Workgroup:
[ OurWorkGroup ] (or whatever)
-
Press [ Network ID ] ( Network Identification Wizard)
[ Next %26gt;]
(.) This computer is for home use and is not part of a business network
[ Next %26gt;]
(.) Windows always assumes the following user has logged on to this ...
User Name: [Administrator]
My Network Places - Win2k Pro Question #5?
First off you lost what you say "part of your desktop" because of exactly what you stated. You became logged on as the Administrator for the machine. However, This would indeed result in the reason nothing was set up for your internet provider, this sort of setting does not carry over in most cases.
Secondly the setup looks fine, but im not sure exactly what you are wanting out of this as you say experience. Be a little more specific on what you are wanting out of it.
Reply:man, why dont you just call router support like and they will walk you thru the setup for free?
Reply:If this is how to setup a home network then Id say you have it but must warn you that you'll need to be alot more specific when dealing with novice users...
Network Drives keep getting disconnected?
I have this recurring problem which is doesnt seem to make sense.My Server keeps Disconnecting the network drives for no apparent reason.Now since i havent found any other solution i have to restart it so it can reconnect them. I'm running Server 2003 R2,on a Wireless network. The thing is when there is no internet,this problem ceases. but once the internet comes back,it starts happening...which suggests that it is internet related.and nowadays its quite a couple of times in one day.i have run a virus scan on both the server and the clients,but havent found anything. and when the network goes down, there is no indication on the client computers. The only time u realise it when u try to acess something from the server, and its unavailable, but your connection to the Router is fine. The clients run XP Proffesional. we running Microsoft Exchange for outlook.any ideas?
Network Drives keep getting disconnected?
We more or less the same problem when we switched to Exchange a short time ago. In our case we lost the connection to the network drives from the client machines. It would show the drive but as disconnected. We did everything but reload XP, didn't make a difference. Finally we removed anti virus from client machines then reloaded and updated Symantic and the problem went away. Have had no problems since then. Have no idea why it was doing it though.
Network Drives keep getting disconnected?
We more or less the same problem when we switched to Exchange a short time ago. In our case we lost the connection to the network drives from the client machines. It would show the drive but as disconnected. We did everything but reload XP, didn't make a difference. Finally we removed anti virus from client machines then reloaded and updated Symantic and the problem went away. Have had no problems since then. Have no idea why it was doing it though.
Network Help!!!!!?
i'm having problems with my network, i can ping the other computers and i also have to map drive done, but when i go to my network places i cant see any of the computers in the network i have 14, I have the file sharing enable and they're in the same workgroup..
Any idea???????????
Network Help!!!!!?
Forget my network places, click on "see workgroup computers".
Network places takes time to get populated.
invisalign
Any idea???????????
Network Help!!!!!?
Forget my network places, click on "see workgroup computers".
Network places takes time to get populated.
invisalign
Subscribe to:
Posts (Atom)